 |
| RDS LiftLog 100 |
| On-Board
Forklift Scale |
| Low cost forklift scale |
| Suitable for forklifts |
| • Operating
Voltage: 11-30 Vdc |
| • System accuracy +/- 2% of capacity (or better) |
|
|
| The RDS Liftlog 100 is an
operator friendly product that has
been specifically designed for use
on forklift trucks working in a
despatch yard or warehouse
environment.
Using a sensor to measure
hydraulic pressure in the system,
the Liftlog 100 informs the
operator of load as a ‘live’ weight
in tons or kg. In addition, when
approaching and at the point of
overload, an internal (and
optional external) alarm will
sound to further inform the
operator of load status. |
Features:
- LCD indicates load as a ‘live’ weight and bar graph of load status.
- Accuracy +/- 2% of truck capacity.
- Single button user control (Reset to zero) for easy operation.
- Initial audible alarm at 90% of permitted load with continuous audible alarm and flashing display at and in excess of 100%.
- Overload logging capability.
- Quick and easy installation.
- Proven technology in a robust waterproof enclosure sealed to IP67.
- Unique bracket enables installation of the instrument in any position.
Advantages:
- Increases loading safety in yard and/or warehouse.
- Value-adding system for minimal investment.
- Allows correct and even loading of storage and vehicles.
- Enables check-weighing of incoming and outgoing goods.
- Identifies operators and forklifts at risk through memory feature.
- Increases vehicle efficiency.
- Maintains accuracy; requires no periodic re-calibration or servicing.
- Promotes best operator use.
- Maintains lifting capacity and driver visibility.
- Minimises machine downtime for servicing or repair.
|
 |
Easy
to install! |
|
Just
1 day to install & Calibrate! |
|
 |
|
|
|
- Backlit LCD graphic display and keypad
|
|
|
Specifications:
Operating Voltage:
|
11 - 30Vdc |
Display |
160 x 128 pixel (9.5 x 7.5cm) |
Temperature range: |
-40 to +85°C storage,
-20 to +70°C operating |
System accuracy: |
+/- 2% of capacity (or better) |
Load sensor rating: |
0 - 250 bar |
Enviro. protection: |
Instrument unit IP34, sensors IP65 |
Enclosure: |
Full RFI/EMI protection
ABS outer casing |
Dimensions: |
155 x 220 x 65mm (HxWxD) 0.75kg |
Systems
Requirements: Your hydraulic systems meet manufactures
standards. Leaks in your hydraulic system may degrade the performance
this system. |
What
You Should Know!
| What
you should know about Hydraulic system. |
| • |
Do
not install scale systems on any equipment that are
poorly maintained. |
| • |
Hydraulic
leak can degrade the performance of any system. |
| • |
Under
powered equipment can cause hydraulics to surge. This is caused
by over sized attachments. |
| • |
With
each of our system you will receive helpful information that
will increase the accuracy of your system. |
|
Note: The
weighing system is hydraulic based. The hydraulic system on the machine
MUST be free of any leaks or defects. Mechanically, the machine must
be sound. Free of play in fork structure. Any discrepancies in
the areas will result in improper operation of the weighing system.
|
