Standard Features:
• Piezo switch technology with stainless steel
• buttons (zero and units)
• Large, bold 0.8" LED display
• NEMA 4X stainless steel enclosure
• Status annunciators: lb, kg, oz, g, negative, motion, center of zero
• Displays units in decimal lb, kg, oz, lb & oz, and grams
• One full duplex RS-232 port
• Two digital inputs for remote zero, print, and units

Standard Features:
• Large .8" (20.3mm) Light Emitting Diode (LED) Display
• Configurable analog to digital measurement rate
• Power for 8 350-ohm load cells or 16 700-ohm load cells
• Primary/secondary units configuration: lb, kg, ounces, short tons, metric tons, grams, or none
• NEMA 4X/IP66 stainless steel washdown enclosure
• 5-button operation
• 2 independent communication ports:
• (1) full duplex, (1) unidirectional or active 20 mA current loop
• Standardized EDP command sets
• Programmable ticket formats up to two 300-character printouts
• Full front-panel digital calibration and configuration
• Universal mounting stand
• Three-stage digital filtering
• Consecutive transaction numbering
• Two digital inputs

Standard Features:
• NEMA 4X/IP66-rated stainless steel enclosure
• Large 1-inch six-digit LCD display
• Six-button operation
• Power for four 350-ohm load cells or eight 700-ohm load cells
• Configurable units multiplier
• Supports 4- and 6-wire load cell connections
• EDP port for full duplex, RS-232 communications
• Powered by 6 "C" batteries for complete portability
• AC adapter for 115 or 230 VAC power
• Configurable standby mode that saves battery life
• RATTLETRAP three-stage digital filtering
• Piece count mode

Standard Features:
• Full numeric keypad
• Keyboard entry of piece weight, tare weight, calibration, and sample size
• Display tare button
• Powered by six C-cell alkaline batteries for complete portability (batteries not included)
• Revolution™ Scale software support
• Three 300-character print ticket formats
• Power for four 350-ohm load cells or eight 700-ohm load cells
• Supports 4- and 6-wire load cell connections
• EDP port for full duplex, RS-232 communications
• NEMA 4x/IP66-rated stainless steel enclosure
• Large 1" (24.5mm), six-digit LCD display
• AC adapter for 115 or 230 VAC power
• Configurable standby mode to prolong battery life
• RATTLETRAP three-stage digital filtering
• Configurable units multiplier
• Configurable analog to digital measurement rate
• Self-resetting thermal fuse

Standard Features:
• Stainless steel NEMA 4X/IP66 washdown enclosure
• Large 0.75" (19mm) Vacuum Fluorescent Display (VFD) with 16 characters for operator prompting
• Selectable analog to digital measurement rate
• 5-point linearization calibration
• 4 macros,30 steps each, ability to interconnect macros with setpoints (macro can start batch setpoints)
• 8 digital inputs plus 8 digital outputs
• 60 16-character programmable alphanumeric fields for display prompts
• Power for eight 350-ohm load cells or 16 700-ohm load cells
• 115 or 230 VAC, 50/60 Hz
• Expanded 29-key keyboard
• Full alphanumeric keypad for entering truck ID, numbering, prompts, etc.
• 300-ID truck in/out programs (6 modes), seven characters
• Batching and continuous mode setpoint functions
• Programmable consecutive numbering
• Two communication ports: (1) EDP port, full duplex RS-232 or RS-485, (1) printer port, simplex RS-232 or 20 mA
• Operate, configure and calibrate via 2 interfaces: front panel (keyboard & display) or EDP serial command port (RS-232, RS-485)
• Six 300-character programmable output formats, independent transmission to EPD or printer port
• 300-character alphanumeric "title block" for custom printouts
• Completely menu driven
• Angled/sloped keypad for user comfort
• Time and date
• Accumulator